Bearing 1.25in Grip Tight 2 Bolt Pillow Block

Mounting: Two-Bolt Base Finish/coating: Nickel Plated Bore diameter: 1.2500 in Overall width: 1.62 in Bore type: Round Operating temperature range: -20 to +225 °F Base to bore centerline: 1.8800 in Radial dynamic load capacity: 5759 lb Duty type: Normal Duty Radial static load capacity: 3461 lb Housing material: Stainless Steel Base width: 1.38 in Locking […]

5JE Sleeve

SPECIFICATIONS COUPLING SIZE 5 MATERIAL TPR INSERT STYLE One Piece SLEEVE TYPE JEM OUTSIDE DIA. 2 15/16 in WIDTH 1 9/16 in HP 7 hp @ 1800 rpm RPM [MAX] 7600 rpm TEMPERATURE RANGE [MIN] -50 °F TEMPERATURE RANGE [MAX] 275 °F TORQUE RATING [MAX] 240 in lb TORSIONAL STIFFNESS (INCH POUNDS/RADIAN) 916 COLOR Black […]

6JE Sleeve

SPECIFICATIONS COUPLING SIZE 6 MATERIAL TPR INSERT STYLE One Piece SLEEVE TYPE JEM OUTSIDE DIA. 3 3/4 in WIDTH 1 7/8 in HP 13 hp @ 1800 rpm RPM [MAX] 6000 rpm TEMPERATURE RANGE [MIN] -50 °F TEMPERATURE RANGE [MAX] 275 °F TORQUE RATING [MAX] 450 in lb TORSIONAL STIFFNESS (INCH POUNDS/RADIAN) 1718 COLOR Black […]

6Jx1 Coupling Flange

COUPLING SIZE 6J BORE SIZE 1 in LOCK TYPE Setscrew KEYWAY SIZE 1/4 x 1/8 COLOR Gray RPM [MAX] 6000 rpm OUTSIDE DIA. 4 in HUB LENGTH 17/32 in BORE TYPE Finished Bore SET SCREW Yes LENGTH THROUGH BORE 1 5/16 in MATERIAL Zinc SET SCREW LOCATION 2 @ 90 Degrees COUPLING TYPE Coupling Flange […]

Air Switch Blower EU

Specifications 1 – 10 MB Max Pressure 500mb/7psi Temperature Rating -5 °F TO +140 °F (-15 °C to + 60°C) For use on European fryers for detecting combustion blower pressure

Air Switch Blower US

Specifications .4″ to 4″ WC Max Pressure 500mb/7psi Temperature Rating -5 °F TO +140 °F (-15 °C to + 60°C) For use on American fryers for detecting combustion blower pressure

Air Switch Low Gas

Specifications 2″ to 20″ WC Max Pressure 500mb/7psi Temperature Rating -5 °F TO +140 °F (-15 °C to + 60°C) For use on American fryers for detecting adequate gas pressure

Ball Nut 1in

1″ Ball nut for use on old model (older than 1999) JD stirrers Bearing only, flange (JDK-SA-1.0BNF) not included

Ball Nut Flange 1in

Ball nut flange to mount 1″ ball nut on older (earlier than 1999) JD stirrers